A comprehensive stock of SWG manufactured in accordance with ASME B16.20 are available for immediate delivery.
Basic styles available
 |
|
|||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
Basic construction type, inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.
STYLE RIR
Solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter. Designed to prevent accumulation of solids, reduce turbulent flow of process fluids and minimise erosion of flange faces. Suitable for male and female flanges.
STYLE CG
Utilises an external ring which accurately centres gasket on flange face; provides additional radial strength to prevent gasket blow-out and acts as a compression stop. A general purpose gasket suitable for use with flat face and raised face flanges. Class 900 and above an internal ring is recommended.
STYLE CGI
A style CG gasket fitted with internal ring which gives an additional compression limiting stop and provides heat and corrosion barrier protecting gasket windings and preventing flange erosion. Suitable for use with flat face flanges and specified for high pressure/temperature service - class 900 and above or where corrosive or toxic media are present.
Other styles available upon request
In addition to spiral wound gaskets,SPG are available to supply
Ring Type Joints
Kammprofiles
Metal Jacketed Gaskets
